Recent Entries

• How to Make CNC Machining Better?

  by huazhe huazhe January 17, 2023
  Reduce machining error rate:   In the process of machining, the error rate of machining will have a serious impact on the quality of the product. Therefore, it is necessary to reduce the machining error rate when performing machining optimization.   The primary step of product processi...

• How Do CNC Machines Work?

  by huazhe huazhe January 17, 2023
  A CNC machine operates according to commands from pre-programmed computer software. This program specifies the speed, movement, and position of the machine to manufacture a specific material shape. The following are the steps involved in CNC machining: A 2D or 3D drawing is created by the design...

• Oil purifier with coalescing vacuum turbine

  by huazhe huazhe January 12, 2023
  Vacuum oil purifier: It is appropriate for situations when the water present in the oil needs to be removed effectively, such as when transformer oil needs to be purified. The transformer oil must have low moisture content and strong insulating performance due to the environment in which it is utili...

• Why go for numerical control machining with a CNC?

  by huazhe huazhe January 6, 2023
  Complex designs and the production of components that are challenging to duplicate with any other manufacturing technique are made possible by CNC machining.   CNC machining is more exact, results in little to no waste, and speeds up production while cutting costs.   In order to effici...

• What advantages does CNC machining offer?

  by huazhe huazhe January 6, 2023
  CNC machines assist manufacturers enhance productivity and precision while lowering the risk of human mistake by enabling them to automate a variety of industrial activities that would otherwise need to be carried out manually.   The specific benefits of concentration are as follows:   ...

• Why is a vacuum oil filter necessary?

  by huazhe huazhe December 30, 2022
  Because during transit, storage, and usage, transformer oil frequently becomes contaminated with moisture and mechanical contaminants. The performance of the transformer oil is impacted when contaminants like moisture are mixed in, and the viscosity of the oil is decreased. This has an effect on the...

• What is the oil production simulation training system?

  by huazhe huazhe December 22, 2022
  The oil recovery simulator produced by Esimtech is based on virtual reality technology, 3D technology, and deep learning and analysis of the oil industry, etc. Through this simulation training system, various skills training and assessment for oil production workers and water injection workers can b...

• What distinguishes chemical oxidation from anodizing?

  by huazhe huazhe December 22, 2022
  Do you know the differences between chemical oxidation and anodizing?   Do you require external power? Anodizing needs to be carried out under the condition of electricity.   Electricity is not required for chemical oxidation.   The idea behind how oxide films are created...

• Why filter transformer oil?

  by huazhe huazhe December 15, 2022
  The purpose of filtering transformer oil is to remove moisture and impurities contained in transformer oil, which may not be conducive to the operation of oil-filled power equipment such as transformers, so as to ensure the safe operation of power equipment such as transformers.   The functio...

• Portable drilling well control simulation training system and f

  by huazhe huazhe December 5, 2022
  ESIM-FCC11 full-size drilling simulation training system (drilling simulator) and ESIM-PDS9B portable drilling well control simulation training system are developed by Esimtech to train drilling and well control in the oil and gas industry.   All hardware systems of the full-size drilling sim...

• What is the difference between stamping and CNC machining?

  by huazhe huazhe December 5, 2022
  Stamping processing and CNC machining processing are common processing methods for metal workpieces, but they are very different.   CNC processing includes lathe processing, drilling machine processing, milling machine processing, boring machine processing, grinding machine processing, etc. I...

• What is the function of sf6 gas recovery equipment?

  by huazhe huazhe December 1, 2022
  How to fill the circuit breaker with Sf6 gas?   The following describes the sf6 circuit breaker inflation kit produced by YUNENG. The sf6 circuit breaker gas filling kit can conduct vacuum and vacuum measurement on the equipment itself, sf6 switch and GIS, and recover sf6 gas from electrical ...

• What is the difference between vacuum oil filter and coalescing

  by huazhe huazhe November 30, 2022
  The two oil purifiers require different types of oil products to function properly.   Coalescing and dehydrating oil purifier   It falls under precision filtering in terms of impurity interception. In order to demulsify and separate the dissolved water and free water, the dehydration t...

• What is the principle of vacuum oil filter?

  by huazhe huazhe November 28, 2022
  The vacuum oil filter is a kind of oil filter that can be used to filter and replenish oil on the spot for various oil immersed transformers, oil immersed current and voltage transformers and high-voltage oil minimum circuit breakers.   Basic principle of vacuum oil filter   The vacuum...

• Petroleum VR Virtual Simulation Training Platform

  by huazhe huazhe November 25, 2022
  In order to effectively solve the high risk problems of oil and gas industry production, Esimtech and universities have combined VR virtual reality, Internet, simulation modeling and other technologies to build an oil and gas virtual simulation training platform, comprehensively improving the safety...

• What is DMLS 3D Printing Service?

  by huazhe huazhe November 25, 2022
  Direct Metal Laser Sintering (DMLS), which directly uses high-energy lasers to melt metal powder deposition, simultaneously sinters and solidifies powder metal materials, and automatically layers and stacks to generate dense geometric solid components.   The metal itself is dense and remelted...

• What is the oil and gas simulation training system?

  by huazhe huazhe November 25, 2022
  Well control refers to the pressure control of oil and gas wells. Well control technology refers to the establishment of pressure balance of oil and gas wells and the recovery after the balance is broken.   Uncontrolled blowout is a disastrous accident with serious nature and huge loss in dri...

• What is the development trend of 3D printing?

  by huazhe huazhe November 25, 2022
  3D printing technology, also known as additive manufacturing technology. It is a new manufacturing technology based on digital model, which can stack materials layer by layer to produce physical goods. For customized and personalized products, 3D printing technology shows great advantages.   ...

• What is the comprehensive logging simulation training system?

  by huazhe huazhe November 24, 2022
  The comprehensive logging simulation training system produced by Esimtech is an advanced simulation training equipment. The simulation training equipment can simulate the real logging field environment, simulate various abnormal accidents and collect, record and print various data in real time. &nb...

• Various oil and gas animations produced by Esimtech

  by huazhe huazhe November 21, 2022
  Dismantlement and working principle animation of drilling and well control equipment   The internal structure, working principle and disassembly of drilling and well control equipment and tools shall be trained in the form of animation to make the trainees familiar with the composition and pr...

• Recognizing CNC Machining Services

  by huazhe huazhe November 21, 2022
  CNC machining centers are suited for processing parts that demand high standards, a variety of common machine tool types, numerous tool fixtures, and multiple clamping and adjusting during the processing process. Many businesses that process parts will use CNC machining centers.   What benefi...

• Why do we need a hydraulic oil purifier?

  by huazhe huazhe November 17, 2022
  Precautions for using hydraulic oil:   Strengthen the effective filtration of oil products, and adopt series filtration and precision filtration when necessary.   Try to make the oil run at the appropriate operating temperature.   Try to avoid water entering the oil to...

• What is the SF6 gas recovery machine?

  by huazhe huazhe November 17, 2022
  The functions of SF6 gas recovery machine mainly include:   Vacuum pumping and vacuum measurement: sf6 gas recovery equipment itself, sf6 switch and GIS.   The sf6 switch can be filled with sf6 gas.   Recover sf6 gas. Dry, purify, recover and recharge SF6 gas.  ...

• What are the advantages of vacuum oil purifier?

  by huazhe huazhe November 14, 2022
  Advantages and characteristics of vacuum oil filter: small volume, light proportion and weight, convenient movement, low noise, long continuous working time, stable performance, convenient operation, etc. It is an ideal equipment for power plants, power stations, substations, electrical appliance ma...

• What is the importance of drilling well control simulator

  by huazhe huazhe November 13, 2022
  Well control technology is an important part of exploration and development technology. Well control technology is also a key technology to ensure drilling safety in the oil and gas industry.   The well control of oil drilling is an extremely important link in the process of oil and gas explo...